Salta al contenuto principale

Introduzione

Replacing the water valve should it fail to work.

Parti

Nessuna parte specificata.

  1. Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver. Reminder for reassembly; This bottom piece is first to be screwed back on. Reminder for reassembly; This bottom piece is first to be screwed back on.
    • Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver.

    • Reminder for reassembly; This bottom piece is first to be screwed back on.

  2. Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.
    • Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.

  3. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  4. Remove the grey plastic casing. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.
    • Remove the grey plastic casing.

    • Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.

  5. Cut the band connecting the hose to the water valve.
    • Cut the band connecting the hose to the water valve.

    • Remove the water valve.

    • Reminder for reassembly; You will need a new band to tie the hose back to the water valve.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Antonio

Membro da: 26/09/2012

73 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 1-3, Propen Fall 2012 Membro di Cal Poly, Team 1-3, Propen Fall 2012

CPSU-PROPEN-F12S1G3

4 Membri

6 Guide realizzate

Where can I buy a new water valve assembly? Are they custom to the device or generally available ? Thanks!

Betsy Goodrich - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 31

Tutti i Tempi: 4,639