Aggiusta la tua roba Comunità Store

Brentwood TS-292B Power Cable Replacement

Introduzione

This guide will show how to remove and replace the power wire in a Brentwood TS-292B toaster.

Cosa ti serve

  1. Brentwood TS-292B Power Cable Replacement, Power Cable: passo 1, immagine 1 di 1

    • Remove the five 6mm screws on the bottom of the toaster with a Phillips #2 screw driver.

    Traduci

  2. Brentwood TS-292B Power Cable Replacement: passo 2, immagine 1 di 1

    • To remove the toasting lever, pull the lever away from the toaster.

    Traduci

  4. Brentwood TS-292B Power Cable Replacement: passo 3, immagine 1 di 1

    • Unplug the wire connecting the casing to the circuit board to fully remove the toaster casing.

    Traduci

  5. Brentwood TS-292B Power Cable Replacement: passo 4, immagine 1 di 1

    • Unscrew the wire bracket with a Phillips #2 screw driver.

    Traduci

  6. Brentwood TS-292B Power Cable Replacement: passo 5, immagine 1 di 1

    • Pull back on the black tab that is holding the circuit board in place.

    • While pulling the tab back, lift up on the circuit board.

    Traduci

  7. Brentwood TS-292B Power Cable Replacement: passo 6, immagine 1 di 1

    • Desolder the power wire connections on the circuit board.

    • Desolder in a well ventilated area.

    • The tip of soldering iron is hot handle with caution.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 168