Introduzione
Following this guide will show you how to access and replace the charging port. The Braven BRV-HD Battery Replacement is a prerequisite for this guide.
Cosa ti serve
-
-
Placing the device on its back with the BRV-HD logo facing up, remove the eight 5mm hexagon 2.0 screws on the front panel.
-
-
-
-
Disconnect the three plugs attached to the plastic charging port panel.
-
Remove and replace the plastic panel with a new one.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
3 Commenti
BRV-HD Bluetooth board parts
BRV-HD Bluetooth broad parts