Introduzione

It is possible, though honestly rare, for the motor of a trimmer to fail for one reason or another. If changing the batteries does not restore functionality for this model, trying to replace the motor would be the next step.

  1. Remove any attached trimmer heads by gripping and pulling away from the body.
    • Remove any attached trimmer heads by gripping and pulling away from the body.

    Aggiungi Commento

  2. Insert an opening pick between the top plate and the grey separator.
    • Insert an opening pick between the top plate and the grey separator.

    • Slide the opening pick around the perimeter of the plate to release the hidden clips.

    Aggiungi Commento

    • Remove the four 7mm Torx T6 screws attaching the grey plastic frame to the black plastic casing.

    Aggiungi Commento

    • Use the opening pick to lift the grey frame from the black casing.

    Aggiungi Commento

    • Remove the circuit board assembly from the frame.

    Aggiungi Commento

    • Pull the small black plastic piece out of the frame.

    Aggiungi Commento

    • Desolder the wires attached to the motor.

    • Remember where the red and black wires attach in case the replacement motor doesn't have it labeled.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Andrew Kluckhuhn

Membro da: 05/07/2018

375 Reputazione

2 Guide realizzate

Team

IUPUI, Team S2-G2, Harley Summer 2018 Membro di IUPUI, Team S2-G2, Harley Summer 2018

IUPUI-HARLEY-SU18S2G2

4 Membri

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 12

Tutti i Tempi: 66