Aggiusta la tua roba Comunità Store

Bose Wave Radio AWR1-1W Speaker Replacement

Introduzione

Speakers do not last forever. This guide will demonstrate how to remove and replace the speakers on the device.

Cosa ti serve

  1. Bose Wave Radio AWR1-1W Speaker Replacement, Base: passo 1, immagine 1 di 2 Bose Wave Radio AWR1-1W Speaker Replacement, Base: passo 1, immagine 2 di 2

    • Remove the four 19mm Phillips #2 screws from the base of the device.

    Modifica

  2. Bose Wave Radio AWR1-1W Speaker Replacement: passo 2, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 2, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 2, immagine 3 di 3

    • Turn the device over, holding the base on with your thumbs.

    • Hold the device tightly to prevent the base from falling off.

    Modifica

  3. Bose Wave Radio AWR1-1W Speaker Replacement: passo 3, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 3, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 3, immagine 3 di 3

    • Gently lift the top off of the device.

    • Lift in the direction shown to avoid damaging the wires connecting the top and base of the device.

    Modifica

  4. Bose Wave Radio AWR1-1W Speaker Replacement: passo 4, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 4, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 4, immagine 3 di 3

    • Pinch and unplug the white connector from the device.

    Modifica

  6. Bose Wave Radio AWR1-1W Speaker Replacement: passo 5, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 5, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 5, immagine 3 di 3

    • Gently pinch and pull on the white ribbon cable to disconnect it from the base.

    Modifica

  7. Bose Wave Radio AWR1-1W Speaker Replacement: passo 6, immagine 1 di 1

    • The base should now be completely detached from the device.

    Modifica

  8. Bose Wave Radio AWR1-1W Speaker Replacement, Front Grill: passo 7, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement, Front Grill: passo 7, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement, Front Grill: passo 7, immagine 3 di 3

    • Wedge the spudger between the top and front panel on the right side of the device.

    • Push down on the spudger, lifting the front panel away from the top panel until it pops out of the right side.

    • Repeat for the left side of the device.

    • Too much pressure may break the panel, but it should flex slightly before it pops out.

    Modifica

  9. Bose Wave Radio AWR1-1W Speaker Replacement: passo 8, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 8, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 8, immagine 3 di 3

    • Once the panel is released on the left side, wedge the spudger between the top panel and front grill of the device as shown.

    • Apply pressure and move the spudger upward until the front grill pops out.

    • Repeat for the right side of the device.

    Modifica

  10. Bose Wave Radio AWR1-1W Speaker Replacement: passo 9, immagine 1 di 1

    • Lift the front grill away from the device.

    Modifica

  11. Bose Wave Radio AWR1-1W Speaker Replacement, Speakers: passo 10, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement, Speakers: passo 10, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement, Speakers: passo 10, immagine 3 di 3

    • Remove a total of eight 15mm Phillips #2 screws surrounding each speaker.

    Modifica

  12. Bose Wave Radio AWR1-1W Speaker Replacement: passo 11, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 11, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 11, immagine 3 di 3

    • Gently pull each speaker out of the device.

    Modifica

  13. Bose Wave Radio AWR1-1W Speaker Replacement: passo 12, immagine 1 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 12, immagine 2 di 3 Bose Wave Radio AWR1-1W Speaker Replacement: passo 12, immagine 3 di 3

    • Pull the wire connected to the speakers out of the device.

    • You already disconnected this wire from the inside of the device earlier.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Cassie Harriman

Membro da: 04/18/17

1.033 Reputazione

5 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Cal Poly, Team S15-G2, Banghart Spring 2017 Membro di Cal Poly, Team S15-G2, Banghart Spring 2017

CPSU-BANGHART-S17S15G2

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 19

Ultimi 30 Giorni: 93

Tutti i Tempi: 6,975