Aggiusta la tua roba Comunità Store

Bose Soundlink Revolve Speaker Replacement

Introduzione

The Bose Soundlink is a very useful speaker. It provides great sound at an affordable price. If the speaker does not work, it is a better idea to fix the device instead of buying a new one. Fixing the Bose Soundlink can save the owner money and can also reduce the toxic fumes generated from broken electronics disposed and burned in landfills. This guide provides step by step information on properly replacing the revolve speaker. The tools needed to complete this installation properly are shown. Using these tools and following the instructions will help the owner get their Bose Soundlink speaker working again.

Cosa ti serve

  1. Bose Soundlink Revolve Speaker Replacement, Subwoofer: passo 1, immagine 1 di 1

    • Use a plastic opening tool or metal spudger to remove the rubber mount from the bottom of the speaker.

    Modifica

  2. Bose Soundlink Revolve Speaker Replacement: passo 2, immagine 1 di 1

    • Use a T10 screwdriver to remove the three 10 mm screws from the bottom of the speaker.

    Modifica

  3. Bose Soundlink Revolve Speaker Replacement: passo 3, immagine 1 di 1

    • Unhook the ribbon conector that connects the bottom cover to the body, then remove the bottom part of the speaker.

    Modifica

  4. Bose Soundlink Revolve Speaker Replacement: passo 4, immagine 1 di 1

    • Use a TR9 screwdriver to remove the screws from the top of the speaker, and then remove the top part of the speaker along with the motherboard.

    Modifica

  6. Bose Soundlink Revolve Speaker Replacement: passo 5, immagine 1 di 1

    • Slide the body of the speaker from the metal cover.

    Modifica

  7. Bose Soundlink Revolve Speaker Replacement: passo 6, immagine 1 di 1

    • Use a T10 screwdriver to remove the four 6 mm screws around the 2 speakers, and remove the speaker units from the body.

    Modifica

  8. Bose Soundlink Revolve Speaker Replacement: passo 7, immagine 1 di 1

    • Pull off the metal case from the speaker body.

    Modifica

  9. Bose Soundlink Revolve Speaker Replacement: passo 8, immagine 1 di 1

    • Remove the three 25.3mm screws from the bottom part of the speaker body with a T10 Torx screwdriver.

    Modifica

  10. Bose Soundlink Revolve Speaker Replacement: passo 9, immagine 1 di 1

    • Use a spudger to pry apart the glued section between the speaker panel and the device.

    Modifica

  11. Bose Soundlink Revolve Speaker Replacement: passo 10, immagine 1 di 1

    • Open the speaker panel, then unwind the three wires from the speaker.

    Modifica

  12. Bose Soundlink Revolve Speaker Replacement, Speaker: passo 11, immagine 1 di 1

    • Remove the four 6 mm screws from the top part of the speaker body using a T10 screwdriver.

    Modifica

  13. Bose Soundlink Revolve Speaker Replacement: passo 12, immagine 1 di 1

    • Remove the speakers from the device.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Autore

con 8 altri collaboratori

Claire Alte

Membro da: 01/14/19

31 Reputazione

1 Guida realizzata

Distintivi: 6

+3 altri distintivi

Team

IUPUI, Team S1-G1, Wilson Spring 2019 Membro di IUPUI, Team S1-G1, Wilson Spring 2019

IUPUI-WILSON-S19S1G1

3 Membri

2 Guide realizzate

8 Commenti

Hi,

I buy used revolve and change top board, battery, cable… everything working good but when you play music I hear some “vibrations” from speaker. Main speaker is ok when playing out of hausing. When I remove speaker from side (step11 of this page) vibration is gone out. If I put speaker on place vibrations is come. Do you have any idea what can causing this problem please?

M.

Martin - Replica

Hi Martin,

Same issue on my side. The vibrations (especially for the basses) come from an air gap. You have to be very careful when you reassemble the device, especially for the speaker. I had have to replace the foamed tape.

Hope this will help

Olivier

Olivier -

Saya punya speaker serupa

Kendalanya dicas hanya menyala lampu indikator kuning terus dan speaker mati total

Bagaimana cara mengatasinya

susanto santo - Replica

My experience is that the side speakers should seal properly otherwise the sound is distorted. Rupture on the membrane allowed an air stream coming out which is directly related to the distorted sound especially at the bass. I used Billy Ellish Bad Guy as a reference. I identified the side speaker to my local Bose service (BaSys, Hungary, thx) via the image in this description. They brought me a pair of speakers for~15eur in two weeks. On the package stands 357793-0010 which is probably the part number. I did the replacement according to the description with success.

katonage - Replica

can anyone tell me where to get a replacement base speaker for my soundlink resolve

brucered69 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 30

Ultimi 30 Giorni: 205

Tutti i Tempi: 12,494