Salta al contenuto principale

Introduzione

This guide will show you how to remove the cover and the motherboard for the Bose SoundTouch 20.

Parti

Nessuna parte specificata.

  1. Remove the (6) six 1.5mm Phillips screws holding on the bottom cover of the speaker using a Phillips #0 screwdriver. Lift the cover straight up and set the cover aside.
    • Remove the (6) six 1.5mm Phillips screws holding on the bottom cover of the speaker using a Phillips #0 screwdriver.

    • Lift the cover straight up and set the cover aside.

  2. Gently pull the white ribbon from the connector on the top side of the power board. Make sure to pull straight back  so you don't bend or damage the ribbon.
    • Gently pull the white ribbon from the connector on the top side of the power board.

    • Make sure to pull straight back so you don't bend or damage the ribbon.

  3. Remove the (4) four 1.5 cm screws connecting the power board to the speaker. Remove the (2) two 1 cm screws connecting the power board to the speaker.
    • Remove the (4) four 1.5 cm screws connecting the power board to the speaker.

    • Remove the (2) two 1 cm screws connecting the power board to the speaker.

    • Gently lift the board up.

    • When lifting the board, be careful of the two ribbons located underneath the board. Don't lift the board straight up, instead tilt it towards the cables. As shown in picture 2.

  4. Remove the white cable by pressing on the side of the connector with a tab and pulling backwards. Remove the white cable by pressing on the side of the connector with a tab and pulling backwards.
    • Remove the white cable by pressing on the side of the connector with a tab and pulling backwards.

  5. Gently pull the thinner white ribbon towards the center of the board. Pull straight down to prevent bending or damaging the ribbon.
    • Gently pull the thinner white ribbon towards the center of the board.

    • Pull straight down to prevent bending or damaging the ribbon.

    • Squeeze the plastic sides of the plug and pull straight down to remove this ribbon.

    • Remove the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Daniel Talanga

Membro da: 28/09/2017

261 Reputazione

2 Guide realizzate

Team

USF Tampa, Team S11-G3, Passmore Fall 2017 Membro di USF Tampa, Team S11-G3, Passmore Fall 2017

USFT-PASSMORE-F17S11G3

4 Membri

5 Guide realizzate

But how do I purchase a new motherboard?

Donald Weber - Replica

Thank you for excellent information and instruction. Can you please send some link to order a new motherboard?

leo.benjamin - Replica

Thank you for the tutorial. How do I purchase a new motherboard ?

benjamin lozano - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 26

Ultimi 30 Giorni: 92

Tutti i Tempi: 2,038