Introduzione

This guide will show how to remove the 4 screws that are holding the two parts of the casing together and how to separate the casing for replacement.

  1. Four round, plastic plugs are located on the back of the device. Using a metal spudger, carefully pry up the plastic covers.
    • Four round, plastic plugs are located on the back of the device.

    • Using a metal spudger, carefully pry up the plastic covers.

    • The covers are all glued on, so be careful not to scar the casing when prying them off. If possible, use a spudger or plastic opening tool to remove them.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Remove the four 1.8 cm Torx Plus TR screws from the outer case. Remove the four 1.8 cm Torx Plus TR screws from the outer case.
    • Remove the four 1.8 cm Torx Plus TR screws from the outer case.

  4. Carefully open up the casing. The top button pad may need to be re-glued upon installing the new casing.
    • Carefully open up the casing.

    • The top button pad may need to be re-glued upon installing the new casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

dfsdfsdfdsfdsfdsafgsdfsdfsdfasdfdasfsda

weller - Replica

When I search for a 1.8 cm Torx Plus TR drill bit, I see a whole set from Amazon. Is there a particular number or head size just so I can purchase one drill bit?

jwm82 - Replica

Hey, did you find out what size screwdriver you need?

kestis155 -

yes its the number 5 torque

art -

dose anyone know where to buy the outer casing for these? i need a mint colored one.

idixon16 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 73

Ultimi 30 Giorni: 364

Tutti i Tempi: 15,334