Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Purchase a new On/Off Switch. The sander should be unplugged from any power sources. Make sure you organize the removed screws, so you can reinstall them in the correct location.
Cosa ti serve
-
-
Using the T20 Torx Screwdriver, remove the four 15.6 mm screws securing the top cover to the sander.
-
Lift the top cover off the sander.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.