Salta al contenuto principale

Introduzione

Purchase a new Microfilter Dust Canister.

Strumenti

Nessun attrezzo specificato.

Parti

  1. Move the support slider located on the bottom of the handle towards the sander. Move the support slider located on the bottom of the handle towards the sander.
    • Move the support slider located on the bottom of the handle towards the sander.

  2. Press the pinch point tabs located on each side of the dust canister and slide the dust canister away from the sander. Press the pinch point tabs located on each side of the dust canister and slide the dust canister away from the sander. Press the pinch point tabs located on each side of the dust canister and slide the dust canister away from the sander.
    • Press the pinch point tabs located on each side of the dust canister and slide the dust canister away from the sander.

  3. Take the locking tab from the original dust canister and place it on the new one.  To do this, slide it downward onto the new dust canister until it snaps into place. Take the locking tab from the original dust canister and place it on the new one.  To do this, slide it downward onto the new dust canister until it snaps into place. Take the locking tab from the original dust canister and place it on the new one.  To do this, slide it downward onto the new dust canister until it snaps into place.
    • Take the locking tab from the original dust canister and place it on the new one. To do this, slide it downward onto the new dust canister until it snaps into place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 233