Bolide Technology Group Dual Alarm Clock Speaker Replacement

Introduzione

Demonstrate the tear-down process and the removal of a broken speaker in the Bolide Technology Group Dual Alarm Clock, so that others looking to replace the speaker have a basis to build from.

Cosa ti serve

Passo 1 Speaker

Bolide Technology Group Dual Alarm Clock Speaker Replacement, Speaker: passo 1, immagine 1 di 3

Bolide Technology Group Dual Alarm Clock Speaker Replacement, Speaker: passo 1, immagine 2 di 3

Bolide Technology Group Dual Alarm Clock Speaker Replacement, Speaker: passo 1, immagine 3 di 3

Slide the clear plastic case off of the speaker

Modifica

Passo 2

Bolide Technology Group Dual Alarm Clock Speaker Replacement: passo 2, immagine 3 di 3

Remove the batteries on the bottom of the radio
Locate and remove the five screws on the bottom of the radio with a Philips Head Screwdriver.
Make sure to keep your screws together so you don't lose them.

Modifica

Passo 3

Bolide Technology Group Dual Alarm Clock Speaker Replacement: passo 3, immagine 3 di 3

Grab your nylon pry tool and wedge it between the outer case and the top of the radio. Slowly pry open the top and remove it.
This may be more difficult to take off if the top hasn't been removed before, but it may be easier to turn the clock upside down for this step.

Modifica

Passo 4

Attrezzo utilizzato in questo passaggio:

Spudger

$2.99

Compra

Using a black nylon spudger to carefully break the glue around the outside of the speaker so it can be dislodged.

Modifica

Passo 5

Bolide Technology Group Dual Alarm Clock Speaker Replacement: passo 5, immagine 3 di 3

Locate the speaker plug for the speaker you wish to remove and slightly tug on it until it becomes unplugged
This can also be done with a pair of tweezers if you find there isn't enough space.

Modifica