Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

The camera may need to be replaced if you are taking pictures and the pictures turn our black or you are receiving an error message when accessing the camera. Be aware that there may be glue under some components.


  1. Remove the two plastic plates with a plastic opening tool. Remove the two plastic plates with a plastic opening tool.
    • Remove the two plastic plates with a plastic opening tool.

  2. Using a Phillips #000 screwdriver, remove the 3mm screws. Be sure to do this for the top and bottom of the phone.
    • Using a Phillips #000 screwdriver, remove the 3mm screws. Be sure to do this for the top and bottom of the phone.

  3. Remove SIM card tray with paperclip or SIM card tray removal tool. Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate.  Remove adhesive if necessary. Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate.  Remove adhesive if necessary.
    • Remove SIM card tray with paperclip or SIM card tray removal tool.

    • Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate. Remove adhesive if necessary.

  4. There is a patch of adhesive underneath the battery, which can make it difficult to remove. Place the plastic opening tool in the highlighted indent, and push up on the battery to remove it.
    • There is a patch of adhesive underneath the battery, which can make it difficult to remove.

    • Place the plastic opening tool in the highlighted indent, and push up on the battery to remove it.

  5. Remove the yellow plastic tape using a pair of tweezers. Remove the yellow plastic tape using a pair of tweezers.
    • Remove the yellow plastic tape using a pair of tweezers.

  6. Use a Phillips #000 screwdriver to remove two black 4.0mm screws. Use a Phillips #000 screwdriver to remove 2 silver 4.0mm screws Remove the plastic cover along the top by tugging on it on the corner as shown.
    • Use a Phillips #000 screwdriver to remove two black 4.0mm screws.

    • Use a Phillips #000 screwdriver to remove 2 silver 4.0mm screws

    • Remove the plastic cover along the top by tugging on it on the corner as shown.

  7. Use the plastic opening tool to lift the camera out. Use the plastic opening tool to lift the camera out.
    • Use the plastic opening tool to lift the camera out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Membro da: 12/11/2014

44.515 Reputazione

95 Guide realizzate

Team

iFixit Membro di iFixit

Community

133 Membri

14.600 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 61