Parti

Nessuna parte richiesta.

Depress the battery cover release button and remove the battery cover
  • Depress the battery cover release button and remove the battery cover

  • Remove the battery from the phone before continuing.

  • Slide the yellow button toward the battery to eject the SIM card

  • Remove the MicroSD card from the SD slot (if present)

Aggiungi Commento

There will be a silver bezel around the edge (the dog ate mine!)
  • There will be a silver bezel around the edge (the dog ate mine!)

  • Insert pry tool near the padlock icon and gently work your way around the bezel to pry it off and reveal the screws.

Aggiungi Commento

  • Grab your T5 Torx screwdriver, and remove all 8 screws

  • Be careful when taking out screws. The silver ones go in the corners, black ones in the middle

Aggiungi Commento

  • With the 8 screws removed, you can gently pry the back cover off. Be gentle, as it is still connected by a ribbon cable

  • Gently pry ribbon cable off, and then you will have the back cover fully removed

Aggiungi Commento

  • The next step is to remove the board.

  • There are 3 ribbon cables connected to it

  • Disconnect the first ribbon cable

  • When you remove the second ribbon cable it will reveal the third ribbon cable

Aggiungi Commento

  • With the 3 ribbon cables disconnected you can gently pry the board up and away from phone

  • With the board removed, you can then simply lift out the LCD display

Aggiungi Commento

  • Once the LCD is removed, the handset disassembled.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

daniel

Membro da: 22/12/2011

342 Reputazione

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 15

Tutti i Tempi: 6,517