Aggiusta la tua roba ComunitĂ  Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

BlackBerry Pearl 8100 Logic Board Replacement

Introduzione

View the repair guide to install the Logic Board for the Blackberry Pearl 8100.

Cosa ti serve

  1. BlackBerry Pearl 8100 Logic Board Replacement, Battery: passo 1, immagine 1 di 1

    • Before working on the phone, be sure that the device is turned off.

    • Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.

    Traduci

    • Remove the battery located directly below back panel.

    Traduci

  3. BlackBerry Pearl 8100 Logic Board Replacement, Keyboard: passo 3, immagine 1 di 1

    • Using a 1.5 mm Hex screwdriver, remove the two screws that hold the two panels together.

    Traduci

  4. BlackBerry Pearl 8100 Logic Board Replacement: passo 4, immagine 1 di 2 BlackBerry Pearl 8100 Logic Board Replacement: passo 4, immagine 2 di 2

    • Using the spudger, pry off the small portion of the casing located at the bottom of the phone.

    Traduci

  6. BlackBerry Pearl 8100 Logic Board Replacement: passo 5, immagine 1 di 1

    • Using the spudger, pry off the side casings one at a time by wedging it between the inner casing and the sides.

    Traduci

  7. BlackBerry Pearl 8100 Logic Board Replacement: passo 6, immagine 1 di 1

    • Using a 1.5mm Hex screwdriver, unscrew the two screws, located on the front of the phone, that connect the back and front panels.

    Traduci

  8. BlackBerry Pearl 8100 Logic Board Replacement: passo 7, immagine 1 di 2 BlackBerry Pearl 8100 Logic Board Replacement: passo 7, immagine 2 di 2

    • Using the spudger, pry off the back body panel by wedging the spudger in between the front and back panels on the side face. Remove the back body panel.

    Traduci

  9. BlackBerry Pearl 8100 Logic Board Replacement: passo 8, immagine 1 di 1

    • Separate the logic board from the front panel.

    Traduci

  10. BlackBerry Pearl 8100 Logic Board Replacement: passo 9, immagine 1 di 2 BlackBerry Pearl 8100 Logic Board Replacement: passo 9, immagine 2 di 2

    • Gently remove the keyboard from front casing. It should snap out of place.

    Traduci

  11. BlackBerry Pearl 8100 Logic Board Replacement, Screen: passo 10, immagine 1 di 1

    • After removing the logic board, place spudger between the logic board and screen and remove the screen, sliding it slowly away.

    Traduci

  12. BlackBerry Pearl 8100 Logic Board Replacement, Logic Board: passo 11, immagine 1 di 1

    • To place the screen on the new logic board, place the golden-colored filament in the slot above the screen’s position, similar to how the old one was placed. There are two pegs that fit into the logic board and secure it.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Robert Cronin

Membro da: 04/08/10

544 Reputazione

6 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Cal Poly, Team 34-57, Forte Spring 2010 Membro di Cal Poly, Team 34-57, Forte Spring 2010

CPSU-FORTE-S10S34G57

5 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 5

Tutti i Tempi: 5,639