Aggiusta la tua roba Comunità Store

BlackBerry KeyONE partial Disassembly

Cosa ti serve

  1. BlackBerry KeyONE partial Disassembly, Remove top cover: passo 1, immagine 1 di 1

    • Carefully remove the top plastic cover. It is held in place by adhesive.

    Modifica

  2. BlackBerry KeyONE partial Disassembly, Remove top frame: passo 2, immagine 1 di 2 BlackBerry KeyONE partial Disassembly, Remove top frame: passo 2, immagine 2 di 2

    • Remove the two Philipps #0 screws that hold in place the top of the phone frame and slide it off.

    Modifica

  3. BlackBerry KeyONE partial Disassembly, Remove back cover: passo 3, immagine 1 di 1

    • Remove the back cover. It mostly just clips off, but has some adhesive in the lower area.

    Modifica

  5. BlackBerry KeyONE partial Disassembly, Disconnect Battery: passo 4, immagine 1 di 2 BlackBerry KeyONE partial Disassembly, Disconnect Battery: passo 4, immagine 2 di 2

    • Remove the two Philipps #0 screws securing the battery connector and unplug the later.

    Modifica

  6. BlackBerry KeyONE partial Disassembly: passo 5, immagine 1 di 1

    • Remove the 6 Philipps #0 screws securing the lower cover and remove it.

    • Remove the three Philipps #0 screws holding down the bar that secures the two main lego-style plugs and remove it.

    Modifica

  7. BlackBerry KeyONE partial Disassembly, Remove top cover: passo 6, immagine 1 di 1

    • Remove the three Philipps #0 screws securing the upper cover and remove it.

    Modifica

  8. BlackBerry KeyONE partial Disassembly: passo 7, immagine 1 di 1

    • Unplug the remaining ribbon cables

    • Remove the last three Philipps #0 screws securing the Motherbard.

    • Now you should be able to replace most components.

    • The screen is held in place from the front by adhesive (or not, in the earlier versions), its cable slides trough the phone to the PCB - It's the large connector in the middle.

    • The battery is glued to the frame firmly. There are three pultabs located underneath the motherboard.

    • Don't forget to remove the sim-tray if you're removing the motherboard.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 14 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

raven

Membro da: 09/02/15

1.080 Reputazione

4 Guide realizzate

Distintivi: 15

+12 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 60

Tutti i Tempi: 9,469