Introduzione

Work area should be lint free, clean and well lit.

Parti

Nessuna parte richiesta.

Open the rear panel to expose the chassis assembly.
  • Open the rear panel to expose the chassis assembly.

  • Remove the battery.

Aggiungi Commento

Use a small non-marring plastic opening tool to remove the lower rear cover.
  • Use a small non-marring plastic opening tool to remove the lower rear cover.

Aggiungi Commento

  • Use a T6 Torq screw to loosen and remove the six screws from the chassis as shown.

Aggiungi Commento

  • Remove the midframe from the phone.

Aggiungi Commento

  • Remove the remaining core assembly from the case, by carefully prying the side release tabs.

Aggiungi Commento

  • Gently pry the side release tabs to lift the flexing keypad from the frame.

  • The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.

Aggiungi Commento

  • Gently lift the motherboard.

  • Locate the screen's ribbon cable underneath the motherboard, and detach it from the phone.

Aggiungi Commento

  • Carefully pry at the sides of the screen until the display assembly is free. Remove the display from the motherboard unit.

  • Insert the replacement display assembly and reverse the directions to re-assemble.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Renae Bishop

Membro da: 07/09/2011

66 Reputazione

4 Guide realizzate

Team

Cuesta, Team 1-3, Zipperian Fall 2011 Membro di Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 3,990