Remove battery cover and battery on the back of the device.
  • Remove battery cover and battery on the back of the device.

Aggiungi Commento

Using a small plastic opening tool, remove the lower rear cover.
  • Using a small plastic opening tool, remove the lower rear cover.

Aggiungi Commento

  • Remove six screws from the midframe of the device.

Aggiungi Commento

  • Remove the midframe from the phone.

Aggiungi Commento

  • Gently pry the back the plastic tabs that secure the motherboard to the case.

  • Slowly work your way around the case until the tabs until the motherboard comes free.

  • Remove the motherboard.

    • The keypad and navigation ball may become loose and fall away from the motherboard.

Aggiungi Commento

  • Carefully detach the antenna from the two clips on the side of the motherboard.

  • Carefully disconnect the antenna from the motherboard.

Aggiungi Commento

  • Carefully disconnect the ribbon cable on the bottom right of the motherboard.

Aggiungi Commento

  • Remove the screen so that it does not get damaged.

Aggiungi Commento

  • Lift the up motherboard from the bottom edge to reveal to ribbon cables.

  • Carefully disconnect the two ribbon cables connecting the motherboard and display.

  • Remove the motherboard.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Johnny Tran

Membro da: 10/09/2011

473 Reputazione

4 Guide realizzate

Team

Cuesta, Team 1-3, Zipperian Fall 2011 Membro di Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 3,793