Parti

Nessuna parte richiesta.

  1. Remove battery cover and battery on the back of the device.
    • Remove battery cover and battery on the back of the device.

    Aggiungi Commento

  2. Using a plastic opening tool, remove the bottom cover.
    • Using a plastic opening tool, remove the bottom cover.

    Aggiungi Commento

    • This will reveal 6 screws on the back, remove the screws and be careful not to lose them.

    Aggiungi Commento

    • Remove the rear cover of the device.

    Aggiungi Commento

    • Remove the motherboard part of the phone from the last piece of case by releasing the black tabs on both sides.

    Aggiungi Commento

    • Detach the ribbon cable on the front of the motherboard.

    Aggiungi Commento

    • Remove the screen to keep it from being damaged.

    Aggiungi Commento

    • Detach the antenna wire at all 3 locations.

    Aggiungi Commento

    • Tilt the motherboard up and detach both ribbon connections.

    • Remove the motherboard.

    Aggiungi Commento

    • Replace the entire center piece of the case to replace the antenna.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Johnny Tran

Membro da: 10/09/2011

473 Reputazione

4 Guide realizzate

Team

Cuesta, Team 1-3, Zipperian Fall 2011 Membro di Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 7

Tutti i Tempi: 5,574