Parti

Nessuna parte richiesta.

Place the phone on a flat surface with the screen facing down.
  • Place the phone on a flat surface with the screen facing down.

  • Remove the plastic backplate by pulling up on the bottom of the cover.

Aggiungi Commento

Remove the battery by pulling up from the top of the battery.
  • Remove the battery by pulling up from the top of the battery.

Aggiungi Commento

  • Remove the two screws midway up the phone on the left and right sides using a T6 Torx Screwdriver.

  • Warning: One screw will have warranty tape covering the screw. Removing this screw will likely void the phones warranty.

Aggiungi Commento

  • Flip the phone over so the keyboard faces up.

  • Insert a plastic spudger into the screen where speaker resides.

  • I recommend going from the side. There are two layers to the cover. You need to make sure you get underneath the bottom layer if you plan on reusing this cover.

  • Gently lift up plastic screen cover until screen cover separates from screen.

  • Continue until screen cover is completely removed.

Aggiungi Commento

  • Insert the spudger into the top of the plastic siding on the front of the phone and lift up until the siding lifts up.

  • Slide the tool around the entire perimeter of the phone until the plastic siding is completely removed.

Aggiungi Commento

  • The keyboard should slide off of the phone now that the plastic siding has been removed.

Aggiungi Commento

  • To detach the screen, there are two screws at the top of the phone to be removed. Use the T6 Torx Screwdriver to remove the screws.

  • There is a gold ribbon on the top left of the phone. Lift up this ribbon gently until it is detached from the phone.

    • Note: When reassembling, the ribbon should be reattached before replacing the top screws.

Aggiungi Commento

  • There are two clips on each side of the phone. Insert a plastic spudger between the clips and the screen.

  • Use pressure to unlatch the screen from the clips.

  • Now that these clips have been undone, the screen should lift up easily.

Aggiungi Commento

Linea Traguardo

Altre 7 persone hanno completato questa guida.

Michael Labdon

Membro da: 19/04/2011

259 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 15-13, Regan Spring 2011 Membro di Cal Poly, Team 15-13, Regan Spring 2011

CPSU-REGAN-S11S15G13

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 7,575