Press down on the battery release button and slide the back cover up with your thumb.
  • Press down on the battery release button and slide the back cover up with your thumb.

Aggiungi Commento

Pry from the top of the battery to pull it out.
  • Pry from the top of the battery to pull it out.

Aggiungi Commento

  • Slide the metal sim card cover to the unlock position.

  • Remove the sim card.

  • The arrows on the sim card enclosure indicate the lock and unlock positions.

Aggiungi Commento

  • Remove the two T5 Torx screws circled at the top of the phone.

  • The T5 Torx screws may be covered by a white sticker.

Aggiungi Commento

  • Remove the red cover at the bottom of the phone.

  • You may have to work a spudger underneath to release the plastic clips.

Aggiungi Commento

  • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

  • Use a spudger to pry the front cover away from the side panels.

  • Work the spudger around the entire phone until the front cover is free.

Aggiungi Commento

  • Remove the keyboard.

Aggiungi Commento

  • Use a spudger to pry off the plastic ring surrounding the trackball.

Aggiungi Commento

  • Remove the trackball from the phone.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sean Willis

Membro da: 26/01/2012

214 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 10-32, Amido Winter 2012 Membro di Cal Poly, Team 10-32, Amido Winter 2012

CPSU-AMIDO-W12S10G32

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 3,443