BlackBerry 8820 Trackball Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

This guide will demonstrate how to remove the trackball on a BlackBerry 8820. To reassemble the device, please follow the instructions provided in reverse order.

Always exercise caution when handling electronic components.

Cosa ti serve

Passo 1 Disassembling BlackBerry 8820 Outer Casing

BlackBerry 8820 Trackball Replacement, Disassembling BlackBerry 8820 Outer Casing: passo 1, immagine 1 di 1

Remove the battery cover by applying pressure and sliding down the silver square on the back of the phone.

Traduci

Passo 2

Remove the battery by prying under it with your finger or the plastic opening tool.
Remove the four small 3/8" long screws using a 1/16" diameter torx screwdriver.

Traduci

Passo 3

Use a nylon spudger to carefully remove the two side bars of plastic.

Traduci

Passo 4

Use a nylon spudger to carefully pry the back casing off.
There are two small clamps on each edge that need to be unhooked before the casing will come off.

Traduci