Salta al contenuto principale

BlackBerry 8820 LCD Screen Replacement

Cosa ti serve

  1. BlackBerry 8820 LCD Screen Replacement, Disassembling BlackBerry 8820 Outer Casing: passo 1, immagine 1 di 1
    • Remove the battery cover by applying pressure and sliding down the silver square on the back of the phone.

  2. BlackBerry 8820 LCD Screen Replacement: passo 2, immagine 1 di 2 BlackBerry 8820 LCD Screen Replacement: passo 2, immagine 2 di 2
    • Remove the battery by prying under it with your finger or the plastic opening tool.

    • Remove the four small 3/8" long screws using a 1/16" diameter torx screwdriver.

  3. BlackBerry 8820 LCD Screen Replacement: passo 3, immagine 1 di 2 BlackBerry 8820 LCD Screen Replacement: passo 3, immagine 2 di 2
    • Use a nylon spudger to carefully remove the two side bars of plastic.

  4. BlackBerry 8820 LCD Screen Replacement: passo 4, immagine 1 di 1
    • Use a nylon spudger to carefully pry the back casing off.

    • There are two small clamps on each edge that need to be unhooked before the casing will come off.

  5. BlackBerry 8820 LCD Screen Replacement: passo 5, immagine 1 di 1
    • Pry off the front casing.

    • Be aware of sensors and other sensitive areas of the newly exposed electronics.

  6. BlackBerry 8820 LCD Screen Replacement, LCD Screen: passo 6, immagine 1 di 1
    • After disassembling the outer casing, the phone should be stripped as shown.

  7. BlackBerry 8820 LCD Screen Replacement: passo 7, immagine 1 di 2 BlackBerry 8820 LCD Screen Replacement: passo 7, immagine 2 di 2
    • At the top of the phone, locate the gloss SATA cable strap connecting the LCD screen to the phone.

    • Using the prying tool, unattach this cable by levering under the connector.

  8. BlackBerry 8820 LCD Screen Replacement: passo 8, immagine 1 di 2 BlackBerry 8820 LCD Screen Replacement: passo 8, immagine 2 di 2
    • Using the prying tool, lever up the old screen as shown.

    • WARNING: Be sure to have disconnected the SATA cable strap prior to attempting this.

  9. BlackBerry 8820 LCD Screen Replacement: passo 9, immagine 1 di 2 BlackBerry 8820 LCD Screen Replacement: passo 9, immagine 2 di 2
    • Insert new LCD screen.

    • Attach cable to the connector located at the top of the phone.

    • Phone should look as it was prior to screen removal.

Conclusione

To reassemble your device, follow these instructions in reverse order.

ryan

Membro da: 04/12/13

44 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 13-64, Johann Spring 2013 Membro di Cal Poly, Team 13-64, Johann Spring 2013

CPSU-JOHANN-S13S13G64

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 608