Introduzione

This guide will show you how to replace the keyboard of the BlackBerry 8820. In order to do so, you must have a 1/16" diameter torx screwdriver and a plastic opening tool.

Parti

Nessuna parte richiesta.

Remove the battery cover by applying pressure and sliding down to the silver square on the back of the phone.
  • Remove the battery cover by applying pressure and sliding down to the silver square on the back of the phone.

Aggiungi Commento

Remove the battery by prying under it with your finger or the plastic opening tool.
  • Remove the battery by prying under it with your finger or the plastic opening tool.

  • Remove the four small 3/8" long screws using a 1/16" diameter torx screwdriver.

Aggiungi Commento

  • Use a plastic opening tool (similar to the one shown) to carefully remove the two side bars of plastic.

Aggiungi Commento

  • Use the plastic opening tool to carefully pry the back casing off.

    • There are two small clamps on each edge that need to be unhooked before the casing will come off.

Aggiungi Commento

  • Pry off the front casing

    • Be aware of sensors and other sensitive areas of the newly exposed electronics

Aggiungi Commento

  • Slide the keyboard downwards, as shown.

  • The keyboard will detach from the casing with a small amount of pressure.

Aggiungi Commento

  • Slide the new keyboard into the casing. If done correctly, it should click into place and stay secure.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

ryan

Membro da: 12/04/2013

41 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 13-64, Johann Spring 2013 Membro di Cal Poly, Team 13-64, Johann Spring 2013

CPSU-JOHANN-S13S13G64

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 342