Introduzione

This is a guide showing how to repair your keypad for the RIM blackberry 7510.

Parti

Nessuna parte richiesta.

  1. Remove the battery cover and battery before continuing.
    • Remove the battery cover and battery before continuing.

    • Remove the six T6 Torx screws on the back of the phone.

    • Make sure to keep the screws somewhere that they will not get lost.

  2. Using your finger nail or a spudger, carefully pry up the back cover.
    • Using your finger nail or a spudger, carefully pry up the back cover.

    • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

  3. Lift off the back cover.
    • Lift off the back cover.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Remove the two T6 screws.
    • Remove the two T6 screws.

  6. Remove the daughterboard. Remove the exposed vibration motor.
    • Remove the daughterboard.

    • Remove the exposed vibration motor.

  7. Unscrew metal plate. Pry off front cover. Lift off front cover to expose LCD screen.
    • Unscrew metal plate.

    • Pry off front cover.

    • Lift off front cover to expose LCD screen.

  8. Remove keypad from front cover and replace or fix existing pad.
    • Remove keypad from front cover and replace or fix existing pad.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

Membro da: 24/01/2010

12 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 14-44, Regan Winter 2010 Membro di Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,459