Introduzione

Before replacing knobs you will have to disassemble oven to take off the knobs and faceplate.

Parti

Nessuna parte richiesta.

  1. Make sure that the toaster is unplugged before you begin.
    • Make sure that the toaster is unplugged before you begin.

    • Turn the toaster upside down and remove the two Phillips #4 1 cm screws attached to the side panels.

    Aggiungi Commento

  2. Pull down and out to remove side panels from the unit
    • Pull down and out to remove side panels from the unit

    • Repeat for the other side.

    Aggiungi Commento

    • Remove the bottom vent.

    • This should come off fairly easy.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Remove the two Phillips #4 1 cm screws that connect the bottom panel to the unit.

    Aggiungi Commento

    • Remove the crumb tray (bottom metal panel) from the toaster unit.

    Aggiungi Commento

    • Remove the aluminum strip on the bottom of the unit.

    Aggiungi Commento

    • Remove knobs by pulling up on them.

    Aggiungi Commento

    • Unhook the bottom of the display panel from the toaster unit.

    • It will be a little tough to pry off, but don't be afraid to be forceful.

    Aggiungi Commento

    • Begin to detach the back panel from the toaster unit and unhook the rest of the display panel.

    • This will also be a little tough to get off, but don't be afraid to be forceful.

    Aggiungi Commento

Linea Traguardo

Jonathan

Membro da: 18/09/2012

135 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 2-10, Propen Fall 2012 Membro di Cal Poly, Team 2-10, Propen Fall 2012

CPSU-PROPEN-F12S2G10

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 23

Tutti i Tempi: 2,644