Aggiusta la tua roba Comunità Store

Black and Decker LDX 120C Light Replacement

Introduzione

If the light in the drill is not glowing upon use, then this guide will show a step by step process on how to replace the light bulb for the drill.

Cosa ti serve

  1. Black and Decker LDX 120C Light Replacement, Outer Case: passo 1, immagine 1 di 1

    • For this guide we will need to use a 1.0 mm phillips #1 screw.

    • There are a total of thirteen screws that need to be removed in order to open the drill and access the interior components.

    Modifica

  2. Black and Decker LDX 120C Light Replacement: passo 2, immagine 1 di 1

    • Remove the four screws on the back top side of the drill.

    Modifica

  3. Black and Decker LDX 120C Light Replacement: passo 3, immagine 1 di 1

    • Remove the four screws that connect the chuck to the drill.

    Modifica

  4. Black and Decker LDX 120C Light Replacement: passo 4, immagine 1 di 1

    • Remove the five screws on the front side of the drill.

    Modifica

  5. Black and Decker LDX 120C Light Replacement: passo 5, immagine 1 di 1

    • Gently grab both sides of the drill casing, and separate both sides from each other.

    Modifica

  7. Black and Decker LDX 120C Light Replacement: passo 6, immagine 1 di 1

    • At this point you should be able to separate both as illustrated.

    Modifica

  8. Black and Decker LDX 120C Light Replacement: passo 7, immagine 1 di 1

    • Now all the components of the drill are visible and can be accessed.

    Modifica

  9. Black and Decker LDX 120C Light Replacement, Light: passo 8, immagine 1 di 1

    • After following the prerequisite guide the drill is now open and you can see all the components of the drill.

    Modifica

  10. Black and Decker LDX 120C Light Replacement: passo 9, immagine 1 di 1

    • First separate the top part of the drill, which includes the motor and the chuck, from the rest of the components.

    • Remove carefully so that wire connection is not damaged throughout this process.

    Modifica

  11. Black and Decker LDX 120C Light Replacement: passo 10, immagine 1 di 1

    • Then separate the other component which includes the trigger, light, and the connection to the battery.

    • Do this carefully so that no wire connection or any component gets damaged.

    Modifica

  12. Black and Decker LDX 120C Light Replacement: passo 11, immagine 1 di 1

    • First check if the connection to the light is not intact.

    • If the wiring is lose simply reconnect the wire.

    • Then check if the light bulb is not damaged in any way.

    • If the light bulb is broken or simply just burnt; simply replace the light bulb.

    Modifica

  13. Black and Decker LDX 120C Light Replacement: passo 12, immagine 1 di 1

    • Grab the connection of the light bulb.

    Modifica

  14. Black and Decker LDX 120C Light Replacement: passo 13, immagine 1 di 1

    • Using pliers cut the two connecting wires from the mother chip.

    • To prevent potential damage to the component, try desoldering the wires. Learn more about soldering here.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

jeffrey zakka

Membro da: 02/09/16

735 Reputazione

6 Guide realizzate

Distintivi: 14

+11 altri distintivi

Team

USF Tampa, Team 11-5, Cheng Spring 2016 Membro di USF Tampa, Team 11-5, Cheng Spring 2016

USFT-CHENG-S16S11G5

5 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 40

Tutti i Tempi: 17,387