Introduzione

In the Black and Decker CHV1510, the battery is often the first component to fail. This guide will show you how to replace the battery in your vacuum.

Parti

Nessuna parte richiesta.

  1. Press the buttons with unlock symbols on both sides of the nozzle.
    • Press the buttons with unlock symbols on both sides of the nozzle.

    • Pull the nozzle upward.

    • The other button cannot be seen on the image.

    Aggiungi Commento

  2. Press the button with the "filter" indicator.
    • Press the button with the "filter" indicator.

    • Pull the filter cover upward.

    Aggiungi Commento

    • Holding the vacuum base firmly, remove all six exterior 20 mm Phillips #0 screws.

    Aggiungi Commento

    • Carefully and gently pull the two halves of the vacuum apart.

    Aggiungi Commento

    • Gently pull the battery pack out of the vacuum frame.

    Aggiungi Commento

    • Holding the battery pack firmly, disconnect the red and black wires from the battery pack by pulling them gently.

    These directions are fine, but they leave out the most difficult part: finding a replacement battery. Nobody sells them, so you can follow these directions and get the battery out, but you won’t have anything to replace it with.

    Shopper Consumer - Replica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Miguel Vilao

Membro da: 09/11/2017

310 Reputazione

3 Guide realizzate

Team

IUPUI, Team S7-G6, Baechle Fall 2017 Membro di IUPUI, Team S7-G6, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G6

3 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 49

Tutti i Tempi: 457