Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #2 screwdriver, remove the six 20 mm screws in the black plastic casing (clamshell).
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your hands, remove the blower tube and clamshell.
-
To remove the clamshell, pull apart starting from the bottom until it is pulled out from the notches. Then slide it out away from the device.
-