Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Black and Decker BV2500 Type 4 Clamshell (Black Outer Casing) Replacement

Cosa ti serve

  1. Black and Decker BV2500 Type 4 Clamshell (Black Outer Casing) Replacement, Clamshell (Black Outer Casing): passo 1, immagine 1 di 1
    • Using a Phillips #2 screwdriver, remove the six 20 mm screws in the black plastic casing (clamshell).

  2. Black and Decker BV2500 Type 4 Clamshell (Black Outer Casing) Replacement: passo 2, immagine 1 di 2 Black and Decker BV2500 Type 4 Clamshell (Black Outer Casing) Replacement: passo 2, immagine 2 di 2
    • Using your hands, remove the blower tube and clamshell.

    • To remove the clamshell, pull apart starting from the bottom until it is pulled out from the notches. Then slide it out away from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Angelica Chow

Membro da: 01/25/14

409 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 9-29, Maness Winter 2014 Membro di Cal Poly, Team 9-29, Maness Winter 2014

CPSU-MANESS-W14S9G29

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 723