Salta al contenuto principale

Black and Decker BDH9600CHV Power Switch Replacement

Cosa ti serve

  1. Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: passo 1, immagine 1 di 3 Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: passo 1, immagine 2 di 3 Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: passo 1, immagine 3 di 3
    • To remove the filter and housing, press the green button labeled "Filter".

  2. Black and Decker BDH9600CHV Power Switch Replacement: passo 2, immagine 1 di 1
    • Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

  3. Black and Decker BDH9600CHV Power Switch Replacement: passo 3, immagine 1 di 2 Black and Decker BDH9600CHV Power Switch Replacement: passo 3, immagine 2 di 2
    • Pull the housing apart.

    • When you pull the housing apart, pieces may fall out. Be sure to track of the parts and where they go.

    • Remove the switch by pulling it out.

  4. Black and Decker BDH9600CHV Power Switch Replacement: passo 4, immagine 1 di 2 Black and Decker BDH9600CHV Power Switch Replacement: passo 4, immagine 2 di 2
    • Replace the new switch by sliding the replacement switch onto the top of the switch mechanism located on the motor.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

IUPUI, Team S1-G4, Harley Fall 2017 Membro di IUPUI, Team S1-G4, Harley Fall 2017

IUPUI-HARLEY-F17S1G4

3 Membri

3 Guide realizzate

Un commento

My switch with up & down button box like

Fernando Palacios - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 10

Tutti i Tempi: 1,125