Introduzione

This guide explains how to replace the release button if it is broken or not working.

Press the release button while pulling up on the head of the vacuum to remove the head.
  • Press the release button while pulling up on the head of the vacuum to remove the head.

Aggiungi Commento

Using  a Phillips head screwdriver, unscrew the four screws holding the panel to the shaft of the vacuum.
  • Using a Phillips head screwdriver, unscrew the four screws holding the panel to the shaft of the vacuum.

Aggiungi Commento

  • Pry the panel up using a spudger and pull up firmly just enough to see the clips of wire on the sides.

Aggiungi Commento

  • Remove the wire clips on both sides of the shaft.

Aggiungi Commento

  • Pull the top piece out of the shaft.

Aggiungi Commento

  • Pinch the two pairs of plastic catches (circled in the picture) to release the button.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Khanh Fleshman

Membro da: 28/01/2018

133 Reputazione

1 Guida realizzata

Team

CPSU-BANGHART-W18S21G2 Membro di CPSU-BANGHART-W18S21G2

Community

1 Membro

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 30