Aggiusta le tue cose Community Store

Bissell CleanView Compact 3508 Brush Roll Cover Replacement

Introduzione

This guide for the Bissell CleanView Compact 3508 will give you step-by-step instructions to replace the base plate at the bottom of your vacuum. This piece simply covers up some of the vacuums internals to protect it.

Cosa ti serve

  1. Bissell CleanView Compact 3508 Brush Roll Cover Replacement, Brush Roll Cover: passo 1, immagine 1 di 3 Bissell CleanView Compact 3508 Brush Roll Cover Replacement, Brush Roll Cover: passo 1, immagine 2 di 3 Bissell CleanView Compact 3508 Brush Roll Cover Replacement, Brush Roll Cover: passo 1, immagine 3 di 3

    • With the vacuum in an upright position, press the latch on the rear of the spine to remove the handle from the vacuum.

    Modifica

  3. Bissell CleanView Compact 3508 Brush Roll Cover Replacement: passo 2, immagine 1 di 2 Bissell CleanView Compact 3508 Brush Roll Cover Replacement: passo 2, immagine 2 di 2

    • Use a Phillips #2 screwdriver to remove the five 20.7 mm screws on the underside of the brush roll cover.

    Modifica

  4. Bissell CleanView Compact 3508 Brush Roll Cover Replacement: passo 3, immagine 1 di 3 Bissell CleanView Compact 3508 Brush Roll Cover Replacement: passo 3, immagine 2 di 3 Bissell CleanView Compact 3508 Brush Roll Cover Replacement: passo 3, immagine 3 di 3

    • Use a pry tool or flathead screwdriver to disengage the two retaining clips securing the brush roll cover.

    • Remove the brush roll cover.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 106