Introduzione
This guide walks you through how to replace the switch cover on the NetCam.
Cosa ti serve
-
-
Use a wrench to loosen up the stand from the back in order to hold the NetCam more comfortably.
-
-
-
-
Carefully use your fingers to gently pull out the white attachment from the tan colored part.
-
-
-
Use a Phillips #0 screwdriver to take out the two 1.2 mm screws on the board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.