Salta al contenuto principale

Beats Solo 3 Earpads Replacement

Cosa ti serve

  1. Beats Solo 3 Earpads Replacement, Earpads: passo 1, immagine 1 di 2 Beats Solo 3 Earpads Replacement, Earpads: passo 1, immagine 2 di 2
    • Use a halberd spudger to create a gap between the earpads and the main body.

  2. Beats Solo 3 Earpads Replacement: passo 2, immagine 1 di 2 Beats Solo 3 Earpads Replacement: passo 2, immagine 2 di 2
    • Peel away the earpads from the headphone earcups.

    • Be gentle when separating the earpads from the main body. Too much force may damage the main body.

  3. Beats Solo 3 Earpads Replacement: passo 3, immagine 1 di 3 Beats Solo 3 Earpads Replacement: passo 3, immagine 2 di 3 Beats Solo 3 Earpads Replacement: passo 3, immagine 3 di 3
    • Remove the black tape with your hands.

    • Be sure to clean the black tape thoroughly, as uncleaned tape can hinder the adhesive of the new pads.

  4. Beats Solo 3 Earpads Replacement: passo 4, immagine 1 di 1
    • Spread a thin layer of glue around the grey perimeter of the new earpads.

    • Don’t put too much glue on or it will spill out and make the earpads dirty.

  5. Beats Solo 3 Earpads Replacement: passo 5, immagine 1 di 2 Beats Solo 3 Earpads Replacement: passo 5, immagine 2 di 2
    • Install the new pads.

    • Be sure to position the earpads properly on the earcups before adhering.

    • The pads may take a minute to stay together, be patient.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Xin

Membro da: 09/19/21

315 Reputazione

1 Guida realizzata

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 24

Ultimi 7 Giorni: 102

Ultimi 30 Giorni: 472

Tutti i Tempi: 13,995