Salta al contenuto principale

Black and Decker SS12C Battery Replacement

Cosa ti serve

  1. Black and Decker SS12C Battery Replacement, Battery: passo 1, immagine 1 di 3 Black and Decker SS12C Battery Replacement, Battery: passo 1, immagine 2 di 3 Black and Decker SS12C Battery Replacement, Battery: passo 1, immagine 3 di 3
    • Detach the battery unit from the drill by pressing down on the battery release button and pulling the battery towards you.

  2. Black and Decker SS12C Battery Replacement: passo 2, immagine 1 di 1
    • Now that the battery component is detached, remove the 4 screws indicated [16mm].

    • Remove each screw with the T10 Torx Security Bit Screwdriver by turning counterclockwise.

  3. Black and Decker SS12C Battery Replacement: passo 3, immagine 1 di 3 Black and Decker SS12C Battery Replacement: passo 3, immagine 2 di 3 Black and Decker SS12C Battery Replacement: passo 3, immagine 3 di 3
    • Now that the screws are detached, separate the two sides of the battery.

  4. Black and Decker SS12C Battery Replacement: passo 4, immagine 1 di 2 Black and Decker SS12C Battery Replacement: passo 4, immagine 2 di 2
    • Remove the highlighted, orange component and set aside.

  5. Black and Decker SS12C Battery Replacement: passo 5, immagine 1 di 3 Black and Decker SS12C Battery Replacement: passo 5, immagine 2 di 3 Black and Decker SS12C Battery Replacement: passo 5, immagine 3 di 3
    • Grip the battery pack and detach it from the casing by pulling it upward.

    • Spring may fall out during the process.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Un commento

I have a CD 9600 Type 3 with a B&D PS120 pack. are there any replacement packs available? Thanks!

Scott D. Deutsch - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 823