Questa traduzione potrebbe non riflettere gli aggiornamenti più recenti dalla guida originale. Aiuta ad aggiornare la traduzione o visualizza la guida d'origine.
Cosa ti serve
-
-
Inserire la punta di una leva nel buco nella parte adesiva della batteria, vicino al plug delle cuffie.
-
Sollevare leggermente la struttura e usate la leva per separarla dal resto.
-
-
-
-
If any of the adhesive strips broke off and the battery remains stuck to the rear case, prepare an iOpener or use a hair dryer to heat the rear case directly behind the battery.
-
-
-
Sfila la batteria dalla struttura.
I only fix phones for myself, and I choose not to put more adhesive in just in case I have to replace the battery again
-
Per riassemblare il telefono, seguire le istruzioni al contrario.
Per riassemblare il telefono, seguire le istruzioni al contrario.
Annulla: non ho completato questa guida.
Altre 18 persone hanno completato questa guida.
Un ringraziamento speciale a questi traduttori:
50%
Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›
2 Commenti
I feel like this guide should at least start with a link to another guide on opening up your phone. It’s weird that it just jumps in assuming your phone has already been opened. From a UX perspective, I should have to hunt around for a preceding guide when the topic of this one shows up on the top of my search results and describes exactly what I want to do.
Use this battery guide to replace your battery. This guide is a prerequisite to remove the battery in the course of another repair, and isn’t meant to be followed on its own.