Salta al contenuto principale

Introduzione

The battery can go bad on many devices. This guide includes removing the back plate and then detaching the battery from the rest of the watch.

  1. Wedge a plastic opening tool between band contacts.
    • Wedge a plastic opening tool between band contacts.

  2. Push in plastic opening tool until the components click and pop out of the holder.
    • Push in plastic opening tool until the components click and pop out of the holder.

    • Repeat steps for other band.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Remove four 4mm screws using a PH000 screwdriver.
    • Remove four 4mm screws using a PH000 screwdriver.

    • Remove back plate.

  5. Use tweezers to remove elastomeric, or zebra, connector.
    • Use tweezers to remove elastomeric, or zebra, connector.

  6. Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken. Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.
    • Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.

  7. Use the pointy edge of the spudger tool to  detach battery leads from the circuit board.
    • Use the pointy edge of the spudger tool to detach battery leads from the circuit board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Kaitlyn Lee

Membro da: 06/11/2017

518 Reputazione

4 Guide realizzate

Team

IUPUI, Team S6-G1, Baechle Fall 2017 Membro di IUPUI, Team S6-G1, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G1

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 58