Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Introduzione

The back plate of this watch can be replaced if it becomes scratched or is broken. It is able to be replaced very easily. The process includes using a screwdriver to remove the four screws on the back plate. Then a new back plate can be added in place of the old one.

  1. Wedge a plastic opening tool between band contacts.
    • Wedge a plastic opening tool between band contacts.

  2. Push in plastic opening tool until the components click and pop out of the holder.
    • Push in plastic opening tool until the components click and pop out of the holder.

    • Repeat steps for other band.

  3. Remove four 4mm screws using a PH000 screwdriver.
    • Remove four 4mm screws using a PH000 screwdriver.

    • Remove back plate.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Kaitlyn Lee

Membro da: 06/11/2017

518 Reputazione

4 Guide realizzate

Team

IUPUI, Team S6-G1, Baechle Fall 2017 Membro di IUPUI, Team S6-G1, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G1

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 51