Salta al contenuto principale

Introduzione

Prerequisite Only

Parti

Nessuna parte specificata.

  1. Turn the base over. You will see four 11mm Phillips #0 screws, one in each corner.
    • Turn the base over. You will see four 11mm Phillips #0 screws, one in each corner.

    • Use a screwdriver to remove all four 11mm Phillips #0 screws.

  2. Locate an easy seam for entry and insert the metal spudger to separate the plastic. Use the spudger in multiple places if necessary. Opening the base may require exerting significant force as it is bound together tightly. This step can be dangerous.
    • Locate an easy seam for entry and insert the metal spudger to separate the plastic. Use the spudger in multiple places if necessary.

    • Opening the base may require exerting significant force as it is bound together tightly. This step can be dangerous.

    • The spudger is designed to make this step easier.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Han Shih

Membro da: 29/09/2016

343 Reputazione

4 Guide realizzate

Team

IUPUI, Team 3-3, Harley Fall 2016 Membro di IUPUI, Team 3-3, Harley Fall 2016

IUPUI-HARLEY-F16S3G3

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 57