Aggiusta la tua roba Comunità Store

Backbone One Phone Connector Replacement

Introduzione

Use this guide to replace a broken phone connector on your Backbone One.

Cosa ti serve

  1. Backbone One Phone Connector Replacement, Remove the screws: passo 1, immagine 1 di 1

    • Use a Phillips screwdriver to remove the four 5.9 mm-long screws.

    Traduci

  2. Backbone One Phone Connector Replacement, Rotate the upper part: passo 2, immagine 1 di 3 Backbone One Phone Connector Replacement, Rotate the upper part: passo 2, immagine 2 di 3 Backbone One Phone Connector Replacement, Rotate the upper part: passo 2, immagine 3 di 3

    • Lift up the upper cover of the controller.

    • Swing the upper cover over and place it on the controller case.

    • Make sure that the interconnecting cable has no tension.

    Traduci

  3. Backbone One Phone Connector Replacement, Remove the screws: passo 3, immagine 1 di 1

    • Use a Phillips screwdriver to remove the two 4.8 mm-long screws securing the phone connector.

    Traduci

  5. Backbone One Phone Connector Replacement, Unthread the phone connector: passo 4, immagine 1 di 3 Backbone One Phone Connector Replacement, Unthread the phone connector: passo 4, immagine 2 di 3 Backbone One Phone Connector Replacement, Unthread the phone connector: passo 4, immagine 3 di 3

    • Use your fingers to thread the phone connecter through the opening in the plastic cover at the right side of the rear cover.

    Traduci

  6. Backbone One Phone Connector Replacement, Disconnect the phone connector cable: passo 5, immagine 1 di 2 Backbone One Phone Connector Replacement, Disconnect the phone connector cable: passo 5, immagine 2 di 2

    • Use a pair of tweezers to disconnect the first phone connector cable from the mainboard.

    Traduci

  7. Backbone One Phone Connector Replacement, Disconnect the phone connector cable: passo 6, immagine 1 di 2 Backbone One Phone Connector Replacement, Disconnect the phone connector cable: passo 6, immagine 2 di 2

    • Use a pair of tweezers to disconnect the second phone connector cable from the mainboard.

    Traduci

  8. Backbone One Phone Connector Replacement, Remove the phone connector cable: passo 7, immagine 1 di 1

    • Remove the phone connector cable.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Un'altra persona ha completato questa guida.

Autore

Adriana Zwink

Membro da: 12/18/19

48.256 Reputazione

167 Guide realizzate

Distintivi: 35

+32 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

16.817 Guide realizzate

4 Commenti

Where can i buy a new part

reye_s - Replica

Unfortunately we haven't found any replacement parts yet. If you find a website that offers replacement parts feel free to share your experience with us.

Adriana Zwink -

Where can I find the connector

Big_deppresion_time_14 Xxx - Replica

My son bent the connector cable. Where do I buy a new one?

Please update as soon as possible!

Krystal Glavic - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 130

Tutti i Tempi: 2,436