Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the metal spudger to peel back the rubber from the bottom of the auxiliary charging base to reveal the screw.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the screwdriver with the J0 bit attatched to detach all four 10 mm screws from the charging base.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the top cover off of the charging base to reveal the internal chip.
-
Use the plastic opening tool to pry the battery from the top cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Tweezers$4.99-
Use the tweezers to carefully detach the wires from the internal chip.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Tweezers$4.99-
Use the tweezers to remove the red wire attached to the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the plastic opening tool to carefully lift and remove the motherboard from the charging base.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.