Aggiusta la tua roba Comunità Store

Axess TA2513-10WT Battery Replacement

Cosa ti serve

  1. Axess TA2513-10WT Battery Replacement, Back Cover: passo 1, immagine 1 di 1

    • Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

    Modifica

  2. Axess TA2513-10WT Battery Replacement: passo 2, immagine 1 di 3 Axess TA2513-10WT Battery Replacement: passo 2, immagine 2 di 3 Axess TA2513-10WT Battery Replacement: passo 2, immagine 3 di 3

    • Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.

    • Slide the plastic opening tool gently along the sides.

    • If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

    Modifica

  3. Axess TA2513-10WT Battery Replacement: passo 3, immagine 1 di 1

    • Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

    Modifica

  4. Axess TA2513-10WT Battery Replacement: passo 4, immagine 1 di 1

    • Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

    Modifica

  6. Axess TA2513-10WT Battery Replacement, Battery: passo 5, immagine 1 di 1

    • Shove the Spudger below the battery pack to remove any tape or adhesive residue.

    Modifica

  7. Axess TA2513-10WT Battery Replacement: passo 6, immagine 1 di 1

    • Lift the battery up with your hands to ensure complete detachment from the screen.

    Modifica

  8. Axess TA2513-10WT Battery Replacement: passo 7, immagine 1 di 1

    • Identify the red wire attached to the node labeled "B+" and the black wire attached to the node labeled "B-"

    Modifica

  9. Axess TA2513-10WT Battery Replacement: passo 8, immagine 1 di 1

    • Press the heated soldering iron down on the "B+" node while simultaneously tugging on the red wire.

    Modifica

  10. Axess TA2513-10WT Battery Replacement: passo 9, immagine 1 di 1

    • Remove the red wire from the node labeled "B+"

    Modifica

  11. Axess TA2513-10WT Battery Replacement: passo 10, immagine 1 di 1

    • Using the same process as the red wire, detach the black wire from the node labeled "B-".

    Modifica

  12. Axess TA2513-10WT Battery Replacement: passo 11, immagine 1 di 1

    • The battery should now be separated from both the screen and circuit board

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Steven Kavanagh

Membro da: 03/24/15

301 Reputazione

3 Guide realizzate

Distintivi: 3

Team

Baylor, Team 6-3, Shaver Spring 2015 Membro di Baylor, Team 6-3, Shaver Spring 2015

BU-SHAVER-S15S6G3

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 8

Tutti i Tempi: 296