Cosa ti serve
-
-
To enable manual mode, flip the switch to "Manual Mode"
-
LCD screen will turn on
-
-
-
-
Press the number of the bottle you want to sample on
-
Press Enter
-
LCD should now show which bottle it will take a sample in
-
-
-
To enable autonomous mode, flip switch to "Node Trigger Mode"
-
LCD should turn off
-
Now the sampler is ready to be triggered remotely by an open-storm sensor node.
Now the sampler is ready to be triggered remotely by an open-storm sensor node.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.