Salta al contenuto principale

Introduzione

Take apart your gun into two pieces.

**Prerequisite Only**

Ricambi

Nessuna parte specificata.

  1. Locate the orange slider on the front side of the gun. Pull the orange slider towards the back of the gun while lifting up on the nose the gun.
    • Locate the orange slider on the front side of the gun.

    • Pull the orange slider towards the back of the gun while lifting up on the nose the gun.

  2. Remove the single 1/8 in. screw at the junction of the body and the nose using a Philips #00 Screwdriver. Remove all parts within the chamber to be able to completely detach the nose of the gun. Be careful to keep track of all the components for reassembly.
    • Remove the single 1/8 in. screw at the junction of the body and the nose using a Philips #00 Screwdriver.

    • Remove all parts within the chamber to be able to completely detach the nose of the gun.

    • Be careful to keep track of all the components for reassembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jimmy King

Membro da: 09/10/2014

113 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 6-22, Maness Fall 2014 Membro di Cal Poly, Team 6-22, Maness Fall 2014

CPSU-MANESS-F14S6G22

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 58