Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With phone in the flipped-open position, use a spudger to remove the four (4) rubber pads (one shown in red circle) located near the corners of the face with the LCD screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a small Phillips head screwdriver to remove the four (4) screws exposed by removed rubber pads.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to pry the front cover off of the phone, gradually working your way around the front face.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to lift away and remove the metallic frame (in blue).
-
Use the spudger to lift away the two electrical contacts (in red).
-
Use the spudger to lift away the speaker (in yellow).
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
This is what the rear of the LCD screen should look like before proceeding. Note all necessary connections are undone.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.