Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Audiovox CDM-8900 Main LCD Screen Replacement

Cosa ti serve

  1. Audiovox CDM-8900 Main LCD Screen Replacement, Main LCD Screen: passo 1, immagine 1 di 3 Audiovox CDM-8900 Main LCD Screen Replacement, Main LCD Screen: passo 1, immagine 2 di 3 Audiovox CDM-8900 Main LCD Screen Replacement, Main LCD Screen: passo 1, immagine 3 di 3
    • Remove screw covers (4 in total) using the spudger.

    • Note: Because the bottom two screw covers are attached with an adhesive, you will not be able to replace them when you reassemble the phone.

  2. Audiovox CDM-8900 Main LCD Screen Replacement: passo 2, immagine 1 di 3 Audiovox CDM-8900 Main LCD Screen Replacement: passo 2, immagine 2 di 3 Audiovox CDM-8900 Main LCD Screen Replacement: passo 2, immagine 3 di 3
    • Unscrew screws (4 in total) using the Phillips #00 screwdriver

    • Set screws aside carefully as they are small and easy to lose.

    • Tweezers may be useful for removing loosened screws.

  3. Audiovox CDM-8900 Main LCD Screen Replacement: passo 3, immagine 1 di 3 Audiovox CDM-8900 Main LCD Screen Replacement: passo 3, immagine 2 di 3 Audiovox CDM-8900 Main LCD Screen Replacement: passo 3, immagine 3 di 3
    • WARNING: The small electronic components inside the phone are fragile; take care not to damage them when completing this step.

    • Wedge one of the plastic opening tools under the faceplate near the hinge.

    • Insert the second plastic opening tool under the faceplate and slide it around the perimeter, detaching the faceplate from the phone.

  4. Audiovox CDM-8900 Main LCD Screen Replacement: passo 4, immagine 1 di 3 Audiovox CDM-8900 Main LCD Screen Replacement: passo 4, immagine 2 di 3 Audiovox CDM-8900 Main LCD Screen Replacement: passo 4, immagine 3 di 3
    • Slide out the two metal braces located along the sides of the LCD screen.

    • A piece of tape is attached beneath each metal brace; after removing the braces, carefully peel back the tape from both sides of the copper frame.

  5. Audiovox CDM-8900 Main LCD Screen Replacement: passo 5, immagine 1 di 2 Audiovox CDM-8900 Main LCD Screen Replacement: passo 5, immagine 2 di 2
    • WARNING: Do not detach or tear any wires when completing this step.

    • Using the spudger, carefully separate the black discs (speaker and microphone) from the inside surface of the phone.

    • Note: The smaller black disc is glued down, so you may need to use some force to detach it. Both disks will still remain attached via wires.

  6. Audiovox CDM-8900 Main LCD Screen Replacement: passo 6, immagine 1 di 2 Audiovox CDM-8900 Main LCD Screen Replacement: passo 6, immagine 2 di 2
    • WARNING: The copper frame is attached to the phone at the hinge. Do not tear the frame.

    • Gently lift the copper frame surrounding the LCD screen.

  7. Audiovox CDM-8900 Main LCD Screen Replacement: passo 7, immagine 1 di 2 Audiovox CDM-8900 Main LCD Screen Replacement: passo 7, immagine 2 di 2
    • With the copper screen lifted up, gently pull out the ribbon connector and lift out the LCD screen.

  8. Audiovox CDM-8900 Main LCD Screen Replacement: passo 8, immagine 1 di 2 Audiovox CDM-8900 Main LCD Screen Replacement: passo 8, immagine 2 di 2
    • Insert the ribbon connector of the new LCD screen into the slot in which the old LCD screen was attached.

    • Press the new LCD screen into place and lower the copper frame back down.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aaron Shaw

Membro da: 04/15/10

159 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 28-31, Regan Spring 2010 Membro di Cal Poly, Team 28-31, Regan Spring 2010

CPSU-REGAN-S10S28G31

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 4,107