Salta al contenuto principale

Introduzione

Repairing the motherboard of the Atari 5200.

  1. Flip your Atari Entertainment System over to its top so you can see the bottom.  You'll see seven screws holding your system together. Use a Philips #0 screwdriver to remove all seven screws.
    • Flip your Atari Entertainment System over to its top so you can see the bottom. You'll see seven screws holding your system together. Use a Philips #0 screwdriver to remove all seven screws.

  2. Flip the Atari Entertainment System back over so that you can now see the top.
    • Flip the Atari Entertainment System back over so that you can now see the top.

    • Use your hands to gently remove the top by sliding it off.

  3. You will now have access to the motherboard.
    • You will now have access to the motherboard.

    • The motherboard can be cleaned with a moist paper towel.

    • Be sure the motherboard is fully dry before playing your Atari Entertainment System or you may damage it!

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Zach Petryszyn

Membro da: 26/09/2014

21 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 13-1, Staggers Fall 2014 Membro di USF Tampa, Team 13-1, Staggers Fall 2014

USFT-STAGGERS-F14S13G1

5 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 1,985