Salta al contenuto principale

Introduzione

If your audio is distorted, replace the speaker component to get fresh, clear sound.

Parti

Nessuna parte specificata.

  1. Using a T4 Torx Screwdriver, unscrew the screws at the marked locations.
    • Using a T4 Torx Screwdriver, unscrew the screws at the marked locations.

    • Place the screws into a container as to not lose them.

  2. Using your iFixit Opening Tool, carefully slide it between the back panel.
    • Using your iFixit Opening Tool, carefully slide it between the back panel.

    • Lift the back plate of your ASUS ZenBook UX31E and place it to the side.

  3. Skip the upgrade.

    Ottieni $10 di sconto su $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Use the platic opening tool to pry the backing of the laptop
    • Use the platic opening tool to pry the backing of the laptop

    • Remove bottom panel of laptop

  5. Remove the screw connecting the speaker component to the motherboard using the screwdriver. Remove the screw connecting the speaker component to the motherboard using the screwdriver.
    • Remove the screw connecting the speaker component to the motherboard using the screwdriver.

  6. Disconnect the sound cable from the motherboard. Disconnect the sound cable from the motherboard.
    • Disconnect the sound cable from the motherboard.

  7. Using the plastic opening tool, pry the speaker component from the computer. Using the plastic opening tool, pry the speaker component from the computer.
    • Using the plastic opening tool, pry the speaker component from the computer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

UW Tacoma, Team 1-2, Rose Winter 2017 Membro di UW Tacoma, Team 1-2, Rose Winter 2017

UWT-ROSE-W17S1G2

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 38

Tutti i Tempi: 997