Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Using a T4 Torx screwdriver, remove the ten screws at the marked locations.
    • Using a T4 Torx screwdriver, remove the ten screws at the marked locations.

    • Place the screws into a container as to not lose them.

  2. Using your iFixit Opening Tool, carefully slide it between the back panel.
    • Using your iFixit Opening Tool, carefully slide it between the back panel.

    • Lift the back plate of your ASUS ZenBook UX31E and place it to the side.

  3. Disconnect the battery from the motherboard by gently pulling up and down on the connector. Disconnect the battery from the motherboard by gently pulling up and down on the connector.
    • Disconnect the battery from the motherboard by gently pulling up and down on the connector.

  4. Using the Phillips #00 screwdriver, remove the screws from the middle and the two corners of the battery. Place the screws into a container as to not lose them.
    • Using the Phillips #00 screwdriver, remove the screws from the middle and the two corners of the battery.

    • Place the screws into a container as to not lose them.

  5. Remove the battery. Remove the battery.
    • Remove the battery.

  6. Use the platic opening tool to pry the backing of the laptop
    • Use the platic opening tool to pry the backing of the laptop

    • Remove bottom panel of laptop

  7. Remove the screw connecting the speaker component to the motherboard using the screwdriver. Remove the screw connecting the speaker component to the motherboard using the screwdriver.
    • Remove the screw connecting the speaker component to the motherboard using the screwdriver.

  8. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  9. Disconnect the sound cable from the motherboard. Disconnect the sound cable from the motherboard.
    • Disconnect the sound cable from the motherboard.

  10. Using the plastic opening tool, pry the speaker component from the computer. Using the plastic opening tool, pry the speaker component from the computer.
    • Using the plastic opening tool, pry the speaker component from the computer.

  11. Attach your Anti-Static Wrist Wrap to something metal as to not shock your system.
    • Attach your Anti-Static Wrist Wrap to something metal as to not shock your system.

    • Peel back the warranty sticker to reveal the screw under it.

    • Using your Phillips #00 Precision Screwdriver, unscrew the screw that you just revealed.

  12. Using your hand, pull the SSD from its slot. Using your hand, pull the SSD from its slot.
    • Using your hand, pull the SSD from its slot.

  13. Disconnect the ribbon between the IO and the motherboard on both sides. Disconnect the ribbon between the IO and the motherboard on both sides.
    • Disconnect the ribbon between the IO and the motherboard on both sides.

  14. Disconnect the fan connector from the motherboard.
    • Disconnect the fan connector from the motherboard.

    • Pull up the clips on the ribbon connectors.

  15. Unscrew the two screws that are across from each other. Unscrew the two screws that are across from each other.
    • Unscrew the two screws that are across from each other.

  16. Using a plastic opening tool, lift the fan off of the laptop. You can now use your hands and carefully pull the fan off the laptop.
    • Using a plastic opening tool, lift the fan off of the laptop.

    • You can now use your hands and carefully pull the fan off the laptop.

  17. Remove the 7 screws holding the motherboard in the case with a Phillips #00 screwdriver. Remove the press fit connector attaching the motherboard to the screen. Remove the two cables that are still attached to the motherboard. You will need to use needle nose tweezers to remove these.
    • Remove the 7 screws holding the motherboard in the case with a Phillips #00 screwdriver.

    • Remove the press fit connector attaching the motherboard to the screen.

    • Remove the two cables that are still attached to the motherboard. You will need to use needle nose tweezers to remove these.

  18. Lift gently and flip the motherboard over in the direction of the track pad. Peel off the the yellow tape.
    • Lift gently and flip the motherboard over in the direction of the track pad.

    • Peel off the the yellow tape.

    • Detach the ZIF connector on the underside of the motherboard connecting it to the keyboard.

    • Remove the motherboard.

  19. Remove the speaker assembly. Lift gently to avoid damaging the speaker assembly.
    • Remove the speaker assembly.

    • Lift gently to avoid damaging the speaker assembly.

  20. Gently peel back  the yellow tape  to reveal where the ribbon cable attaches to the track pad. Gently peel back  the yellow tape  to reveal where the ribbon cable attaches to the track pad.
    • Gently peel back the yellow tape to reveal where the ribbon cable attaches to the track pad.

  21. Remove the 56 screws marked in red circles using a Phillips #000 screwdriver.
    • Remove the 56 screws marked in red circles using a Phillips #000 screwdriver.

  22. Put your hand under the keyboard and  gently push the keyboard up and away from the frame of the computer with your fingers.
    • Put your hand under the keyboard and gently push the keyboard up and away from the frame of the computer with your fingers.

    • Be very careful to not damage the keyboard itself when removing it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 50

Tutti i Tempi: 504