Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the eight 3mm screws using the T5 Torx Screwdriver.
-
Remove the 8mm screw using the T5 Torx Screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully remove the back plate from the laptop and located the battery and speakers towards the top.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 4mm screws using the Phillips #0 screwdriver.
-
Remove the single 6mm screw using the Phillips #0 screwdriver.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your finger, gently lift upwards to remove the connection clip from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently pull the speaker connection clip outwards to remove it.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully remove the speaker wires that are tucked underneath the tabs located at the edge of the laptop case.
-
Gently remove the battery from the laptop, the defective speakers should be glued with adhesive to the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully peel away the defective speakers from the battery.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.